1. Turn Off Water Supply:

Locate the water valve behind your toilet and turn it clockwise to shut off the water supply.

2. Remove Toilet Seat:

Lift the bolt covers behind your toilet seat and use a flathead screwdriver to unscrew the bolts. Remove the toilet seat and set it aside.

3. Install NIRVANIAN Attachment:

Align the NIRVANIAN bidet attachment over the toilet bowl, ensuring the adjustable sliding brackets line up with the bolt holes.

4. Reattach Toilet Seat:

Place the toilet seat back over the NIRVANIAN attachment, aligning the bolt holes. Insert and tighten the bolts to secure both the seat and the attachment.

5. Connect T-Adapter:

Disconnect the flexible water hose from the toilet tank’s fill valve. Attach the provided T-Adapter to the fill valve, ensuring the rubber washer is in place. Reconnect the flexible hose to the bottom of the T-Adapter.

6. Attach NIRVANIAN Hose:

Connect one end of the provided NIRVANIAN hose to the side of the T-Adapter and the other end to the water inlet on the NIRVANIAN bidet attachment. Ensure all connections are tight to prevent leaks.

7. Turn On Water Supply:

Slowly turn the water valve counterclockwise to restore water flow. Check for any leaks at the connections.

8. Test the Bidet:

Use the control dial on the NIRVANIAN attachment to test the spray function. Adjust the nozzle position and water pressure as needed for optimal cleaning.